分享盒子
Product Parameters:
- Power: 220V AC 50HZ
- Size: Approximately L5000 x W2000 x H1900mm (varies based on equipment configuration)
- Speed: Approximately 300-500 sets/hour (depending on product process)
- Weight: Approximately 4000kgs (varies based on equipment configuration)
- Air pressure: 4-6 kg/cm²
Product Description:
- FL-917B-Automatic Multi-Transistor Heatsink Assembly Line is designed for the assembly of multiple IGBTs/transistors and heat sinks, fully automating the entire process. The high automation level requires only manual placement and removal of the heat sink from the reflow fixture, with all other processes fully automated.
- The fully automated workflow is as follows: manual placement of the heat sink – single-sided thermal paste application – application of thermal paste on the other side of the ceramic sheet – detection and placement of ceramic sheet – feeding and placing the transistor – screw locking – inserting heat shrink tubing or rubber pads – manual removal of finished products – repeated cycle.
- The equipment adopts a fixture reflow system with a compact design and high flexibility. It allows for easy fixture replacement to accommodate different product specifications. Various workstations can be shielded, turned on/off, or replaced based on different assembly processes, ensuring high compatibility.
- The IGBT feeding process can be enhanced with additional functions such as automatic placement of magnetic beads, heat shrink tubing, and dust protection caps.
- The device performs precise scientific planning based on the time taken for each process, ensuring optimal equipment allocation at each workstation and optimizing the workflow to maximize processing efficiency.
- For high-precision steps, visual and precision sensing methods are used for accurate inspection, ensuring the quality and consistency of each process and the final product.
- To ensure high-quality screw locking for IGBTs and transistors, intelligent electric screwdrivers are used with torque segmentation, protecting sensitive components and preventing ceramic sheet breakage.
- The thermal paste application is carried out using pad printing or screen printing methods, ensuring even application and high consistency.
FAQ
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
Our machines use a fully automated workflow, precise control systems, and efficient assembly technology to streamline the production process. Whether for transistor and heat sink assembly or other electronic components, our machines significantly reduce manual intervention and errors, helping improve overall production speed.
This machine is a high-efficiency, fully automated inline screw fastening system designed for power module and transistor assembly. It supports a wide range of transistors and components, handling complex assembly processes including lead forming, thermal paste dispensing, precision positioning, visual inspection, and screw fastening. The machine is equipped with advanced features such as segmented torque control for multi-stage screw fastening and accommodates various screw sizes. Designed for seamless integration into production lines, all processes are automated and completed across dedicated workstations, ensuring consistent quality, reduced manual labor, and increased production efficiency. In the production of control boards for home appliances, consumer electronics, automotive electronics, and power supply products, it is common to fasten multiple transistors onto standard or custom-shaped heatsinks. This process also involves installing multiple insulation sheets, loading insulating pellets, and performing multiple thermal paste scraping steps. Traditionally, these complex tasks are done manually step-by-step, often leading to inconsistent transistor placement, inefficient processes due to excessive steps, and high labor demands FL-916 Fully Automatic Multi-Transistor Heatsink Assembly Machine This type of problem can be solved in a targeted manner, and all operations are completed automatically. In the PCBA MOSFET screw fastening process, it is often necessary to insert a rubber gasket onto a screw, assemble the components, and then secure the MOSFET onto the heatsink. The FL-908 Automatic Automatic Screw Rubber Pellet Sleeving Machine is designed for bulk screws and bulk rubber gaskets. It automatically arranges and feeds the components, ensuring each screw is paired with a gasket. With high automation, the machine only requires manual material loading and collection, making it an ideal device for improving labor efficiency and boosting production capacity. It is a perfect solution for optimizing PCBA assembly lines, significantly enhancing efficiency while reducing labor costs. The machine adopts a rotary turntable working principle, with each action completed at designated stations. The transistor tube is automatically arranged, and the system features automatic feeding, followed by lead trimming, molding, and thermal grease application. It automatically grabs and positions components, and performs automatic screw fastening. The system boasts high automation. This machine is a dedicated fully automatic screw fastening machine designed specifically for mounting transistors (MOSFETs) onto heatsinks. It operates based on a rotary indexing table with high-precision divider, enabling each process to be completed at a designated workstation. Controlled by a Mitsubishi PLC and operated via a user-friendly touchscreen HMI, the system offers excellent stability and a low defect rate. The FL-910 Handheld Automatic Screw Locking Machine is designed to improve the efficiency of screw fastening during product assembly. The entire system is fully automated through a Mitsubishi PLC control, with key processes including sorting, feeding, individual screw distribution, and automatic fastening. This design enables optimal, user-friendly operation, significantly reducing the labor intensity for operators and improving fastening efficiency by several times. The screw feeding method of this equipment can be selected as suction or blow feed, depending on the screw characteristics and the product being fastened. The machine features a dual Y-axis design, ensuring high production efficiency, and is equipped with an intelligent detection function. It can detect abnormalities such as missing screws, cross-threading, and stripped threads. The screw fastening range includes sizes from M1 to M6.
Related Equipment
FL-917A
Heatsink and Semiconductor Assembly Machine for Power Electronics
FL-916
Fully Automatic Multi-Transistor Heatsink Assembly Machine
FL-908
Automatic Screw Rubber Pellet Sleeving Machine
FL-915
Transistor Heatsink Locking and Forming Machine
FL-915A
Fully Automatic Transistor Heatsink Forming and Fastening Machine
FL-910
Handheld Automatic Screw Locking Machine
FL-912
Three-Axis Automatic Screwdriver Machine

CUSTOM AUTOMATION SOLUTIONS
Looking for the Right Automation Solution?
Tell us about your components, production requirements, and automation goals. Our engineering team can help you evaluate a suitable equipment solution.


